Edimax ES-5844P
eingetragen in der Kategorie Ethernet Switches der Datenbank Netzwerktechnik Schreiben Sie eine Bewertung zu dieser Komponente.
| Hersteller | Edimax [alle Produkte von Edimax anzeigen] |
| Produkt | ES-5844P |
| Bezeichnung | 8 Ports Desktop Switch with 4 PoE |
| Artikelnummer | |
| Datenblatt | Datenblatt anzeigen |
| Handbuch | Handbuch anzeigen |
| Firmware Download | |
| Testberichte | |
Shops / Preisvergleich |
Amazon
||
Geizhals.at
|
| Gehäusetyp | Desktop |
| modularer Aufbau | nein |
Lüfter | unbekannt |
| Webinterface ? | nein |
| Kommandozeileninterface (CLI) ? | nein |
| SNMP ? | nein |
RMON ? | nein |
| Ports 100Base-TX ? | 8 |
| Ports 100Base-FX ? | 0 |
| Ports 1000Base-T ? | 0 |
| Ports 10GbE ? | 0 |
| Anzahl GBIC-Slots ? | 0 |
Anzahl SFP-Slots ? | 0 |
| VLAN-Support (port based) ? | nein |
| VLAN-Trunking (802.1Q) ? | nein |
| CoS/QoS ? | nein |
| Jumbo Frames ? |
nein |
| Link Aggregation ? | nein |
| Power over Ethernet (PoE) ? | ja |
| Port Mirroring ? | nein |
IEEE 802.1x ? | nein |
- Conforms to IEEE 802.3 10BASE-T, IEEE802.3u 100BASE-TX and IEEE 802.3x flow control standards
- Supports 10/100Mbps auto-detect half/full duplex
- Supports TP auto MDI/MDI-X function for auto TX/RX swap
- Supports 802.3x flow control pause packet for full duplex
- Supports IEEE 802.3af compliant
- Supports Power over Ethernet (PSE) on each PoE-TP port (End-Point)
- Full power(15.4w) support for per PoE-TP port
- Auto detect powered device and consumption levels
- Smart feature for PD on/off, PD detection, power level, PD status and power feeding priority (X)
- Automatic Fault Detection (Over/Under Voltage & Current)
- Thermal shutdown protection (Tj > 150ºC) |
|
Diese Komponente wurde bisher nicht bewertet.
Schreiben Sie die erste Bewertung.
|
Eintrag aktualisiert am 19.09.2006
|