Multicast Routing
geschrieben am 12.09.2006 um 18:45 von Sebastian
Hallo,
folgende Problemstellung:
zwei VLANs an einem Layer 3 Switch (192.168.1.0/24; 192.168.2.0/24).
Der Switch routet und ist Standartgateway.
In beiden VLANs stehen Server, die mittels Multicast miteinander kommunizieren. Leider funktioniert die Kommunikation nicht über den Layer3 Switch.
Es handelt sich um einen Extreme Networks Alpine, der kein Multicast Routing (PIM-DM, PIM-SM) ohne entsprechender Lizenz kann.
Ist es eventuell möglich etwas statisch zu konfigurieren?
Vielen Dank
Sebastian
geschrieben am 15.09.2006 um 07:48 von hannah
Der Alpine 3800 kann statische Multcast Routes. Ich vermute aber, dass das an der PIM Unterstützung hängt.
geschrieben am 17.09.2006 um 12:48 von Sebastian
Hallo Hannah,
danke für die Antwort. Ich glaub auch das statische Multicast Routen im Zusammenhang mit einem aktive MC-Router zu nutzen sind, da ich aber in diesem Netz keinen Multicast Router habe bringt mir das Ganze nix.
Configuring Static Multicasting Routing
Static multicast routing gives you the flexibility to configure a separate path for unicast and multicast datagrams. You can also configure each static multicast route to be weighed against a specific unicast routing protocol before deciding the RPF interface. The longest prefix match (LPM) or RP is stored in the Static Multicast Route table for use by PIM.
To configure static multicast routing use the following command to add a static multicast route to the static multicast routing table:
configure mroute add <source>/<mask> {<protocol>} <rpf-address> {<distance>}
Denke mal so eine Route soll so aussehen: 224.0.2.0/24 PIM 192.168.1.1
Dafür brauche ich aber einen MC Router - denke ich.
Gruss
[ Dieses Thema im Live-Forum aufrufen ]
|