Hersteller | TRENDnet [alle Produkte von TRENDnet anzeigen] |
Produkt | TEG-S41SX |
Bezeichnung | 5-Port 10/100/1000 MBit/s Kupfer-Gigabit-Switch mit Mini-GBIC |
Artikelnummer | |
Datenblatt | Datenblatt anzeigen |
Handbuch | |
Firmware Download | |
Testberichte | |
Shops / Preisvergleich |
Amazon
||
Geizhals.at
|
Gehäusetyp | Desktop |
modularer Aufbau | nein |
Lüfter | nein |
Webinterface ? | nein |
Kommandozeileninterface (CLI) ? | nein |
SNMP ? | nein |
RMON ? | nein |
Ports 100Base-TX ? | 0 |
Ports 100Base-FX ? | 0 |
Ports 1000Base-T ? | 4 |
Ports 10GbE ? | 0 |
Anzahl GBIC-Slots ? | 0 |
Anzahl SFP-Slots ? | 1 |
VLAN-Support (port based) ? | nein |
VLAN-Trunking (802.1Q) ? | nein |
CoS/QoS ? | nein |
Jumbo Frames ? |
nein |
Link Aggregation ? | nein |
Power over Ethernet (PoE) ? | nein |
Port Mirroring ? | nein |
IEEE 802.1x ? | nein |
* 4 x 10/100/1000 MBit/s Auto-Negotiation und Auto-MDIX-Fast-Ethernet-Ports
* 1 x 1000 MBit/s Mini-GBIC-Slot für optionales Gigabit-Fiber-Modul (LC)
* Voll-/Halbduplex-Übertragungsmodus für jeden Port (für 1000 MBit/s nur Vollduplexbetrieb)
* Store-and-Forward-Switching Architektur
* Integrierte Address Look-Up Engine, unterstützt bis zu 4K absolute MAC-Adressen
* Unterstützt 1M RAM-Datenpuffer
* IEEE-802.3x-Datenflusskontrolle (Flow-Control) bei Vollduplexbetrieb
* Zurückweisung (Back-Pressure) für Halbduplexbetrieb
* Zahlreiche Diagnose-LEDs auf Vorderseite
* 5 Jahre Garantie
|
nicht verfügbar
|
Diese Komponente wurde bisher nicht bewertet.
Schreiben Sie die erste Bewertung.
|